This large diaphragm omnidirectional microphone capsule can be used with the Solid State Phantom Power. The diaphragm and housing are both made from stainless steel. This gives the capsule a unique immunity against ambient temperature variations. The precision-made back plate is placed in a quartz insulator for maximum electrical stability.
The d:dicate™ 4041 Large Diaphragm Microphone has a frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz. Furthermore, it has an extremely low self-noise of 8 dB(A). It also has enhanced SPL handling capability of up to 134 dB SPL before clipping occurs.
This omnidirectional condenser microphone is designed to work in a standard 48 V phantom power environment. It features the MMC4041 Large Diaphragm Capsule so the mic offers superior sound quality.
The diaphragm and housing are both made from stainless steel. This gives the capsule a unique immunity against ambient temperature variations. The precision-made back plate is placed in a quartz insulator for maximum electrical stability. This gives the d:dicate™ 4041 Large Diaphragm Microphone a unique sensitivity of up to 90 mV/Pa.
The MMC4041 Large Diaphragm Microphone Capsule can be unscrewed from the MMP4000-SP preamplifier, which allows you to exchange the preamp.
The 3532-SP Stereo Kit comes with:
a Metal Case
2 x 4041-SP
2 x MMP4000-SP Preamp
2 x Microphone Holder
2 x Foam Windscreena Stereo Boom
DPA Microphones d:dicate™ 4041-SP Omni Large Diaphragm Mic
Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Condenser w. stainless steel diaphragm
Effective frequency response
20 Hz - 20 kHz
Frequency range, ±2 dB
20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
Sensitivity, nominal, ±2 dB at 250 Hz
70 mV/Pa; -23 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Max. 8 dB(A) re. 20 µPa
Equivalent noise level, ITU-R BS.468-4
Max. 20 dB
Distortion, THD < 1%
123 dB SPL RMS, 126 dB SPL peak
Dynamic range
Typ. 118 dB
Max. SPL, THD 10%
134 dB SPL peak
Rated output impedance
< 200 Ω
Cable drive capability
Up to 100 m (328 ft)
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
2.20 mA
Connector
3-pin XLR-M (Standard P48)
Weight
190 g (6.7 oz)
Capsule diameter
24 mm (1 in)
Microphone length
170 mm (6.7 in)
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
2-Year warranty by serial number. Does not cover wear and tear by analysis of DPA Microphones A/S. Two-way shipping to be borned by buyer unless product is found to be defective by manufacturing defects.